Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Show 9 more photos Show less
1 / 13
How can we help you? Please write to us.
Product Description
Product Description
LumenX 1500W Solar Spotlight — The Best Budget-Friendly Solar Street Light in the USA
Why pay another electric bill when the sun is doing it for free? Meet the LumenX 1500W Solar Street Light — the brightest, most affordable outdoor solar spotlight available in the USA. Whether you are lighting up your driveway, backyard, parking lot, or garden path, this light has you covered day and night, rain or shine.
Why Everyone is Choosing LumenX
Forget those dim, flimsy solar lights that give up after one cloudy day. The LumenX solar spotlight is built different:
∙ 216 ultra-bright SMD2835 LED beads at 6500K cool white — one LumenX LED equals 10 regular LEDs. Your neighbors will notice.
∙ 220-degree super wide-angle lighting floods up to 800–1,200 sq ft of coverage. That is not just a spotlight, that is serious brightness on a budget.
∙ 21% high-efficiency solar panel charges fully in just 4–5 hours and keeps your lights running 18–24 hours on a full charge, or up to 30 hours in low-light mode. Zero electricity costs.
Big Battery, Longer Nights
Packed with an 8000mAh lithium battery, this solar street light does not tap out when you need it most. Cloudy week? No problem. It keeps going so you never have to worry about being left in the dark.
Rain, Snow, Heat? Bring It.
IP66 waterproof rating plus a die-cast aluminum alloy body means this light handles whatever the weather throws at it. It operates in temperatures from -68 degrees F to 148 degrees F, so whether you are dealing with Minnesota winters or Arizona summers, LumenX holds up.
Easy Install — No Electrician Needed
This is a true all-in-one solar spotlight. The panel and light are one unit, so there is no complicated wiring, no separate panel brackets, and no expensive electrical work. Just mount it on a wall, wooden stake, or lamp post between 1 and 3 inches in diameter at a height of 8 to 12 feet and you are good to go. A 20-inch mounting arm is included.
Wall mounting is a four-step process:
1. Drill 4 holes using the bracket as your guide
2. Insert wall anchors
3. Screw in the mounting arm
4. Attach the light and you are done
This is a true all-in-one solar spotlight. The panel and light are one unit, so there is no complicated wiring, no separate panel brackets, and no expensive electrical work. Just mount it on a wall, wooden stake, or lamp post between 1 and 3 inches in diameter at a height of 8 to 12 feet and you are good to go. A 20-inch mounting arm is included.
Wall mounting is a four-step process:
1. Drill 4 holes using the bracket as your guide
2. Insert wall anchors
3. Screw in the mounting arm
4. Attach the light and you are done
Wall Mounting Suggested Install Steps:
1. Drill 4 holes according to the bracket arm hole location.
2. Knock the screw into the hole and loosen the screw nut.
3. Fix the bracket arm with screws and nuts.
4. Install the light on the bracket.
Specifications:
Power of Solar Street Light: 1500W
Battery: 3.2V/8000mAh
LED: 216pcs
LED Beads Type: Super bright LED beads
Lighting Angle: 220 degrees super wide-angle lighting
Color Temperature: 6500K/Cool White
Waterproof Rate: IP66
Material: Aluminum Alloy, Glass
Operating Temperature: -68℉~148℉
Power Switch
Please confirm the switch has been opened before use, if the switch isn‘t open, it is unable to charge and use the remote control.
Remote Control Function Introduction
3 Smart Control Modes — Yes, a Remote is Included
You are in charge. Control your light three ways:
1. Light Control (Dusk-to-Dawn) — turns on automatically at sunset and off at sunrise. Set it and forget it.
2. Motion Sensor Mode — jumps to 100% brightness when movement is detected, then drops to 30% energy-saving mode when the area is clear. Smart, efficient, and great for security.
3. Remote Control — adjust brightness in five levels (20% / 40% / 60% / 80% / 100%), set timers, and switch modes from up to 16 ft away.
It has a memory function. After turn off the light, then turn on the light again it will default the brightness and working mode before.
1. After turn on through the remote control, the lights will automatically turn on at dusk and turn off at dawn. You can also be turned off by the remote control "off" button.
2. You can change the brightness by "-", "+" on the remote control, you can also choose the lighting time and lighting mode.
3. If the working mode you choose is "2H", the radar sensing function will be turned off and the light will stay on constant brightness within 2 hours. After 2 hours later the radar sensing function will turn on again.
4. After you press "Radar" ,the light will turn on the motion sensor mode. Object movement detected, 100% brightness. No object movement detected, 30% brightness.
5. If you press "AUTO", the light will default dusk to dawn, or until the battery runs out.
6.In any lighting mode, it all can adjust the brightness.
TENKOO Tips:
- 1.Firstly put the AAA battery into the remote control. The control distance of remote is 16ft(5m).
- 2.Before using the remote control, please ensure that the switch on the lamp is opened.
- 3.Before installation to test whether the light can work normally.
- 4.Regularly clean the solar panel to prolong the service life.
Product description
Reviews
You may also like
Hannah 48" Bath Vanity Set
$1,503.65
$1,769.00
Titan Shield Gloss
$33.05
$42.95
SEMCO Liquid Membrane™ Waterproofing
$26.80
$29.90
Crystal Coat Floor Rejuvenator
$38.50
$39.80
