Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
1 / 1
Request a Quote
Elegant Gray Leather Marble Slab Random
Available Slabs
1 batch · 1 slab · 57.19 sq ft in stock
Select the slabs you are interested in
-
Batch No: 44104-2-1
- Size:
- 71 x 116 in
- Per slab:
- 57.19 sq ft
- Slabs:
- 1
- Total:
- 57.19 sq ft
- Location:
- Fairfax, VA
Inventory updated Sep 17, 2026
1 / 1
Marble · Slab
Elegant Gray Leather Marble Slab Random presents a muted gray field with a leather finish that softens the stone's natural luster. The surface reads as a quiet, tactile plane rather than a glossy mirror. We sell this stone in full slabs cut from the block, with the random sizes listed in the stock report. Pricing is by quote, because each slab carries its own dimensions and veining. Marble slabs like this one require a licensed fabricator to template and install the piece.
Design
Gray tones in leather finish
The gray ground carries subtle veining that shifts from light to medium across the face. A leather finish breaks up the reflection, so the stone reads softly in bright light and deeper in shadow. Each slab comes from a different part of the block, so the veining density and the tone will differ from one piece to the next. Dry-lay the slabs from the available stock before installation to distribute the variation evenly. Two finishes on one sheet is not applicable here, as this is a single-surface slab. The leather face masks water spots and fingerprints better than a polished cut would.
Leather texture
Brushed surface with low sheen
Natural variation
Veining and tone differ per slab
Where to use it
The stone suits commercial interior walls, residential countertops, and shower walls. It fits well in a bathroom, a living room, or a kitchen. We hold two batches in stock at our Fairfax, VA warehouse. The six slabs available measure either 71 by 121 inches or 71 by 116 inches. Slabs from the same batch match most closely, so specify a batch if you need a tight veining match. A licensed fabricator templates, cuts, and installs the slab after delivery. The stone goes to a fabricator, not to a home or a job site. Delivery arrives by A-frame truck within 50 miles of the Fairfax warehouse, and by crated LTL freight beyond that range.
Batch matching
Request same batch for tight veining
Fabricator install
Licensed template and install only
Why we chose it
- Batch consistency.Two batches hold six slabs in Fairfax. Slabs from one batch share the closest veining and tone.
- Stocked sizes.The six slabs measure 71 by 121 inches or 71 by 116 inches. Random sizes require fabrication to fit your layout.
- Leather finish.The brushed face holds a low sheen. It hides water spots and fingerprints better than a polished cut.
Care
Marble reacts to acids like lemon, vinegar, and wine. Seal the surface after installation and reseal every one to two years. Use a pH-neutral stone cleaner and avoid bleach, ammonia, and abrasive pads.
Questions we get
How do I get a quote for this slab?
Can I use this in a shower wall?
How is a slab delivered?
Specifications
- Product Size
- random" × 3/4"
- Product Length
- random"
- Product Thickness
- 3/4"
- Product Coverage (sq. ft. / pcs)
- 60
- Material
- Marble
- Color
- Gray
- Finish
- Leather
- Edge
- Straight Cut
- Shape
- Rectangular
Usage
- Bath Floors/Walls
- Commercial Interior Floors
- Commercial Interior Walls
- Outdoor Floor
- Outdoor Wall
- Pool
- Residential Countertops
- Residential Interior Floors
- Residential Interior Walls
- Shower Floors
- Shower Walls
- Backsplash
- Pool & Spa
- Res. Light Floors
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
