Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
1 / 12
How can we help you? Please write to us.
Product Description
BUBBLER FOUNTAIN OUTDOOR
A Still Surface With One Small Disturbance at the Center
A drum shaped gray vessel with a finely rippled outer wall, holding a flat still surface of water. A single low bubbler rises at the center and the water leaves quietly over the rim. There is no cascade, no falls, and nothing stepping down.
What that gives you is a mirror rather than a movement. The surface stays flat enough to reflect the sky and whatever is planted around it, with one point of disturbance at the middle. Cascading fountains give the eye something to follow. This gives it something to rest on, which is a different job entirely.
The vertical ripple texture on the outer wall runs the full height, so even standing still the vessel has movement in its surface. That texture is doing the visual work that a cascade would otherwise do.
BubblerCenter Jet
StillWater Surface
RippledOuter Wall
IncludedPump
What Makes This Fountain Different
- It reflects, which no cascading fountain can do. A flat still surface holds the sky, the planting behind it, and the changing light through the day. Falling water destroys that instantly, which is why every tiered fountain looks the same at noon and at dusk. A bubbler keeps the surface calm enough to mirror while still moving, so the piece changes with the weather rather than repeating the same motion regardless of it.
- The quietest kind of water feature. Nothing falls and nothing lands, so there is no impact sound at all. If you want water near a bedroom window, a seating area, or an outdoor office, this is the type that works where a cascade would be too much.
- Vertical ripple texture on the drum. Fine scoring runs the full height of the outer wall, so the vessel has surface movement even when you are not looking at the water. On a piece with no cascade that texture is what keeps it from being a plain gray barrel.
- A low broad shape. The drum stays below eye level and reads as part of the ground rather than as an object standing on it, which suits a planted bed or a terrace where you do not want to break a sightline.
What the water sounds like
Barely anything. A center bubbler moves water without dropping it, and the overflow leaves around the whole rim rather than falling from a point, so there is no impact anywhere. This is the quietest type of fountain here and it is chosen for that reason rather than in spite of it. It will not mask traffic and is not meant to. How loud it seems will still shift with the water level and the surface underneath, which is why a fixed decibel number would tell you nothing useful about your own space.
Quick Specifications
| Design | Drum vessel with center bubbler and full rim overflow |
|---|---|
| Material | Resin |
| Finish | Gray stone with vertical ripple texture |
| Water flow | Low center bubbler, still surface |
| Lighting | LED |
| Pump | Included recirculating pump |
| Power | AC plug in |
| Water connection | Self-contained, no plumbing required |
| Recommended use | Outdoor |
Setup, Care, and Warranty
Setup and placement
Fill it, plug it in, done. No plumbing and nothing to bury.
Level it carefully. On a still surface with rim overflow, any tilt sends all the water off one side and the mirror effect is lost. This matters more here than on any cascading design.
Getting the reflection
Place it where there is something worth reflecting. Open sky, overhanging foliage, or a planted background all read in the surface. Under a solid roof or against a blank wall the water is just water.
Keep the bubbler low. Turning the flow up disturbs the surface and you lose the reflection, which is the main reason to own this shape.
Water level and daily care
Keep enough water in the reservoir to cover the pump at all times. A wide open surface loses water to evaporation faster than an enclosed design, so check every few days in warm weather.
Skim leaves off promptly. On a still surface a single leaf is highly visible and it also interrupts the even overflow at the rim.
Looking after the finish
In hard water areas a pale film builds at the rim where the water leaves, and on a smooth gray band that shows clearly. Clean it before it sets. The vertical ripple texture on the wall hides marks well, so most cleaning is at the top edge.
Winter storage
Before hard freezes, drain the reservoir completely, disconnect and store the pump indoors, and let the piece dry out. The open top collects rain and snow all winter, so cover it once drained.
3-year warranty
This product includes a 3-year warranty. Coverage, claim requirements, and required documents are subject to the warranty policy that applies at the time of purchase. Keep your order confirmation, and contact customer support with your order details if service is needed.
Questions Before You Choose
Is there a waterfall?
No, and that is the point. A low jet rises at the center and the surface stays flat enough to reflect. If you want falling water and the sound that comes with it, choose a tiered or rockery design instead.
How quiet is it really?
Quieter than any cascade here. Nothing falls and nothing lands, so there is no impact sound at all. People choose this type for a bedroom window, a seating area, or an outdoor working space where a tiered fountain would be too present.
Where does it fit?
A planted bed, a terrace, beside a path, a courtyard, anywhere you want water without breaking a sightline. It stays below eye level and reads as part of the ground rather than as an object placed on it.
Is it safe around children and pets?
The low broad shape is stable and there is nothing to pull on, which makes it one of the safer designs here. The open surface is within reach, so animals will drink from it. Set it on a level solid surface and run the cord where it will not catch a foot. The recirculating water is not intended for drinking.