Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
CASCADING OUTDOOR FOUNTAIN
Seven slate ledges, each one offset to the left or right of the one above it. Water does not drop straight through the column. It runs laterally across each ledge, reaches the edge, falls to the next, and crosses back the other way, tracing a zigzag down the full 48 inches. From the front you can watch a single stream travel sideways before it drops, which is a different thing to look at than water falling in a line.
That path also changes what you hear, and this is the part worth understanding before you choose. A normal tiered fountain has several fall points running at once, so the sound is a set of overlapping impacts. Here there is one continuous stream covering more distance, so what you get is a steady uninterrupted flow rather than a percussive splash. Some people find that far more restful. Others miss the texture that multiple fall points give. It is a genuine preference, not a quality difference.
The column stands 48 inches on a 23 by 16 inch footprint, so it makes a vertical statement without taking much floor. Warm LEDs sit beneath the staggered basins and light the winding path from below, which on a zigzag design does real work. Lit from underneath, you can follow the whole route of the water after dark instead of seeing a lit surface.
Continuous and even rather than percussive. Because a single stream traverses the full height instead of several falling at once, there is no overlapping impact and no repeating rhythm to pick out. It reads as flowing water rather than as falling water, which is a quieter and steadier presence than a multi tier cascade of the same size. How loud it seems will still shift with the water level, the surrounding paving or planting, and how enclosed the space is, which is why a fixed decibel number would tell you nothing useful about your own patio.
| Design | Seven ledge serpentine slate column |
|---|---|
| Material | Resin |
| Finish | Stacked slate column texture |
| Dimensions | 23 in. long, 16 in. wide, 48 in. high |
| Water flow | Lateral zigzag across seven ledges |
| Lighting | Warm LED beneath the staggered basins |
| Pump | Included submersible pump |
| Power | AC plug in, 110V |
| Water connection | Self-contained, no plumbing required |
| Recommended use | Outdoor, year round |
Fill the reservoir, plug it in, done. No plumbing and nothing to bury. Set it level before filling, and on this design level matters more than usual. The water path already runs sideways by design, and a tilted base pushes it further until a ledge overshoots its landing and water runs down the outside of the column instead of onto the next tier.
Face it where you will actually be sitting. The zigzag reads from the front and is largely lost from the side.
Keep enough water in the reservoir to cover the pump at all times. A single stream travelling this far loses more to evaporation than the height alone suggests, so check the level every few days and more often in heat and wind.
Clear leaves off the ledges. On a lateral path a leaf near an edge sends the whole stream off course, and you will see the zigzag break before you find the cause.
The stacked slate surface is what carries the look, so wipe it with a soft cloth and keep harsh liquid cleaners off it. In hard water areas a pale film builds along the wet edges of each ledge, and on a textured surface it is much easier to remove before it sets than after.
Before hard freezes, drain the reservoir and every basin completely, disconnect and store the pump indoors, and let the column dry out. Water left standing in a ledge through a freeze and thaw is what damages stacked designs.
This product includes a 3-year warranty. Coverage, claim requirements, and required documents are subject to the warranty policy that applies at the time of purchase. Keep your order confirmation, and contact customer support with your order details if service is needed.
Each of the seven ledges is offset to the left or right of the one above it, alternating as you go down. Water crosses each ledge sideways before dropping to the next, so it traces a Z shape down the full height rather than falling straight. From the front you can watch it travel across each tier before it drops.
Different rather than simply quieter. One continuous stream gives an even flowing sound with no separate impacts in it. A multi tier cascade gives several fall points at once, which is busier and has more texture. Neither is better. If you are placing it next to seating and want something you can talk over, this one suits. If you want the fountain to be the sound of the space, a multi point design does more.
A garden bed, a patio corner, beside an entry, or anywhere you want height without floor space. The slate texture suits modern and natural planting equally. Give it a backdrop and face it toward your seating, since the zigzag is a front on effect.
A four foot column should not be climbed on or pulled. Set it on a hard level surface, keep it out of the main running route, run the cord along a bed edge or wall so it will not catch a foot, and use a protected outdoor outlet. The recirculating water is not intended for drinking.
Your cart is empty.