Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
1 / 6
How can we help you? Please write to us.
Product Description
ROCK WATERFALL OUTDOOR FOUNTAIN
Layers That Do Not Line Up, on Purpose
A tiered fountain steps water down through levels of the same shape at regular intervals. This one does not. The rock layers are offset and uneven, different sizes at different angles, the way stone actually settles over a long time rather than the way a mold produces it. Water leaving one level lands off center on the next, so the cascade changes direction as it descends instead of falling in a straight line.
That winding path is the whole design, and it is what makes a 59 inch piece read as a formation rather than as a stack. The eye cannot find a repeating unit, which is exactly what stops it looking manufactured. Faux moss worked into the crevices adds the surface age that finishes the effect, so the piece reads as something that has been in the garden a while rather than something delivered last week.
Warm LEDs sit inside each basin and light the water from below after dark, which on an irregular structure matters more than on a symmetrical one. Lit from underneath, the offsets and overhangs throw shadows across each other and the depth of the rock reads at night in a way flat daylight flattens out.
59 in.Height
ResinMaterial
IncludedPump
Warm LEDPer Basin
What Makes This Fountain Different
- Asymmetry is the product, and it is not a small difference. Standard tiered fountains use regular horizontal steps of similar size, so water falls predictably from one uniform level to the next and the eye reads the pattern immediately. Here the layers vary in size, angle, and offset, so the water path changes direction as it descends and no two falls are alike. From a distance that is the difference between something that looks like a natural rock formation and something that looks like a product. It is also the reason this costs more than a symmetrical piece of the same height, since irregular sculpting cannot be repeated from one simple mold.
- Light in every basin, which asymmetry needs. On a symmetrical fountain one light at the base is enough because every level looks the same. On an irregular structure the overhangs and offsets are the point, and they only show when each level is lit from within. That is why the LEDs sit in the individual basins rather than at the bottom.
- Moss in the crevices. A small detail that does a specific job. New stone reads as new. Moss in the joints is what the eye uses to judge that something has been in place for years, and it is the difference between a naturalistic piece and a decorative one.
- Five feet, in resin. A stone waterfall at 59 inches would need machinery to place and a prepared foundation. Resin keeps it to a piece that can be delivered and positioned normally, and the earth toned finish does the work at any sensible viewing distance.
What the water sounds like
Varied rather than rhythmic. Because the falls are different heights landing at different angles into different amounts of standing water, the sound never settles into a loop the way a symmetrical tower does. It reads closer to a stream over rocks than to a fountain, which is the point of the design. At five feet it has real presence and will soften background noise on a patio without being loud. How loud it seems will still shift with the water level, the surrounding surfaces, and how enclosed the space is, which is why a fixed decibel number would tell you nothing useful about your own garden.
Quick Specifications
| Design | Multi level asymmetric stacked rock waterfall |
|---|---|
| Material | Resin |
| Finish | Natural earth tones with faux moss detail |
| Height | 59 in. |
| Water flow | Winding cascade across offset rock levels |
| Lighting | Warm LED built into each basin |
| Pump | Included quiet submersible pump |
| Power | AC plug in, 110V |
| Water connection | Self-contained, no plumbing required |
| Recommended use | Outdoor, year round |
Setup, Care, and Warranty
Setup and placement
Plug and play on a level outdoor surface. No plumbing and nothing to bury. Set the final position before filling, because a five foot piece full of water is not something you shift afterwards.
Level matters more here than on a symmetrical fountain. The water path already runs off center by design, and a tilted base pushes it further until a whole section of the cascade misses its landing and runs down the outside instead.
Water level and daily care
Keep enough water in the reservoir to cover the pump at all times. Lifting water to 59 inches works the pump harder than a small fountain does, and running dry is what kills pumps. Water falling this distance also loses more to evaporation and wind drift than a low piece, so check the level more often in heat.
Clear leaves out of the basins. On an irregular structure a leaf on one ledge redirects a whole section of the path, and you will hear the change before you find the cause.
Looking after the finish
The earth toned surface and the moss detail are what make this read as natural, so wipe it with a soft cloth and keep harsh liquid cleaners off it. In hard water areas a pale film builds along the wet edges and is easier to remove before it sets into the texture than after. Years of full sun will lift some depth out of any applied color, so a spot with afternoon shade keeps it looking new longer.
Winter storage
Before hard freezes, drain the reservoir and every basin completely, disconnect and store the pump indoors, and let the piece dry out. Water left where it can freeze inside the structure is what causes damage over winter. Covering it afterwards stops rain and snow refilling the basins.
3-year warranty
This product includes a 3-year warranty. Coverage, claim requirements, and required documents are subject to the warranty policy that applies at the time of purchase. Keep your order confirmation, and contact customer support with your order details if service is needed.
Questions Before You Choose
How is asymmetric layering different from a standard tiered design?
A tiered fountain has regular horizontal steps of equal or similar size, and water falls predictably from one uniform level to the next. Here the layers vary in size, angle, and offset, so the water path changes direction as it descends. The result reads as a natural formation rather than as a stack of bowls. If you want a classical symmetrical outline, a tiered design is the right choice and this one will look untidy to you.
Where does it belong?
Large backyard gardens, woodland and naturalistic planting, courtyards and patios where a five foot water feature is proportionate. It suits loose planting, ferns, grasses, and existing stone. It does not suit a formal clipped bed, where irregular layering reads as disorder rather than as nature.
What are the base dimensions and the weight?
The supplier documentation refers to the product manual for both figures rather than publishing them, so we are not going to guess at numbers we cannot verify. If you need the footprint or the shipping weight before ordering, contact customer support and we will get the confirmed figures for you.
Is it safe around children and pets?
A structure this tall should not be climbed on, and children should be kept from pulling on the upper rock levels. Set it on a hard level surface with clear space around it, run the cord along a bed edge or wall rather than across open ground, and use a protected outdoor outlet. The recirculating water is not intended for drinking.