White Gray 10x11 Polished Arabesque Calacatta Gold Marble Mosaic Tile (5 pack, 3.75 sq ft/case)

The White Gray 10x11 Polished Arabesque Calacatta Gold Marble Mosaic Tile transforms flat surfaces into a complex geometric arrangement of interlocking curves. Each unit is manufactured as a mesh-mounted sheet measuring approximately 10" x 11", comprised of repeated individual tiles shaped like stylized quatrefoils. These chips measure roughly 2" x 2.1", allowing you to lay down a continuous pattern that mimics the scale of handmade installations. The polished stone surface reflects ambient light efficiently, helping to brighten compact bathrooms or dark kitchens while showcasing the natural contrast between the bright white body and the prominent gray veining.

Packaging includes a case of five sheet packs, totaling 3.75 square feet of coverage. This pre-fabricated format eliminates the need for precise manual cutting of complex curves, ensuring uniform grout line spacing throughout the project. The rigid polyester mesh backing holds the stone chips firmly in place during the setting phase, preventing shifting or buckling as the thin-set sets.

Detailed Usage Guidelines

As a natural stone product, Calacatta Gold marble requires specific maintenance protocols to preserve its appearance. Before installation in moisture-prone areas, apply a penetrating sealer to both the tiles and the grout. When properly maintained, this material performs well in the following scenarios:

• Wall Installations: Ideal for kitchen backsplashes behind gas ranges due to heat tolerance and ease of cleaning grease from the non-porous polished face once sealed.
• Wet Areas: Approved for shower walls and steam room accents where water runs vertically across the wall plane.
• Floor Options: Can be used in residential hallways or powder rooms, but avoid installation in high-abrasion commercial areas or exterior patios exposed to freeze-thaw cycles.

For a modern, monochromatic look, pair the neutral white and gold tones with graphite or charcoal epoxy grout. To maintain the stone's luster, avoid acidic cleaners containing vinegar or lemon juice, which can etch the calcium carbonate-based marble surface over time.