Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Chamonix Beige is a 12x24 porcelain tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Chamonix looks like a mountain stone packed with small fragments of other stones. It is a colored body, rectified porcelain in Bianco, Beige, Gray and Dark Gray, with a multi-size Muretto brick wall tile, mosaics and bullnose to match.
At 12x24, the tile can run in a brick pattern, a one-third offset or stacked vertically on a wall.
The matte face has no sheen, so Chamonix Beige does not throw glare and keeps footprints and water spots out of sight. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
The edges are rectified, cut square after firing, so the tile can be set with a narrow grout joint. Each box holds 8 pieces, 15.5 sq ft, about 61 lb, and orders round up to full boxes.
Also in Chamonix Beige: 24x24 tile, 24x48 tile, 4x24 bullnose, Muretto Brick 12x24 decor, hexagon mosaic, square mosaic.
Chamonix is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.