Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Elements White is a 24x48 porcelain tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Elements is a quiet, fine-grained stone look in Cream, Stone and White. The rectified, colored body porcelain comes in 24x48, 24x24 and 12x24, with a leaf-shaped mosaic, a square mosaic and a bullnose.
The 24x48 size makes Elements White read almost like a slab, with few joints.
In matte, the porcelain tile reads soft and natural under any light and keeps smudges from showing. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
The edges are rectified, cut square after firing, so the tile can be set with a narrow grout joint. Each box holds 2 pieces, 15.5 sq ft, about 61 lb, and orders round up to full boxes.
Also in Elements White: 12x24 tile, 24x24 tile, 4x24 bullnose, leaves mosaic, square mosaic.
Elements is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.