Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Horizons Ivory is a 4x12 porcelain tile with a concrete look in a matte finish, 8.5 mm (5/16 inch) thick.
Horizons mixes a concrete surface with the grain of stone. The rectified, colored body porcelain comes in Ivory, Gray, Graphite and White, from 24x48 to 4x12, with a square mosaic, a 4 inch hexagon and a bullnose.
The 4x12 is a small rectangle for walls and floors: run it as a subway, stack it, or set it in a herringbone.
The matte face has no sheen, so Horizons Ivory does not throw glare and keeps footprints and water spots out of sight. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
Every piece is rectified, so the edges are straight and true and the grout lines can stay thin. It ships in full boxes of 11.65 sq ft (36 pieces), roughly 46 lb each.
Also in Horizons Ivory: 12x24 tile, 24x24 tile, 24x48 tile, 4x24 bullnose, hexagon mosaic, square mosaic.
Horizons is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.