Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Lucent Blue is a 24x48 porcelain tile with a marble look in a matte finish, 8.5 mm (5/16 inch) thick.
Lucent is a soft marble look in three calm colors: White, a pale Green and a pale Blue. The rectified, colored body porcelain comes from 24x48 to 4x12, with a lens mosaic, a square mosaic and a bullnose.
The 24x48 size makes Lucent Blue read almost like a slab, with few joints.
The matte face has no sheen, so Lucent Blue does not throw glare and keeps footprints and water spots out of sight. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
The edges are rectified, cut square after firing, so the tile can be set with a narrow grout joint. Each box holds 2 pieces, 15.5 sq ft, about 61 lb, and orders round up to full boxes.
Also in Lucent Blue: 12x24 tile, 24x24 tile, 4x12 tile, 4x24 bullnose, lens mosaic, square mosaic.
Made in the USA at Del Conca's plant in Loudon, Tennessee, which is also where it ships from.
Your cart is empty.