Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Nature Belvedere is a 24x24 porcelain tile with a marble look in a matte finish, 8.5 mm (5/16 inch) thick.
Nature reproduces eight well-known marbles, among them Calacatta Gold, Statuario, Carrara, Taj Mahal and the dark Belvedere. The rectified, colored body porcelain runs from 24x48 to 4x12 with mosaics and bullnose; four of the colors also come polished in 24x48.
The 24x24 square suits a straight grid or a quarter offset on an open floor.
In matte, the porcelain tile reads soft and natural under any light and keeps smudges from showing. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
Every piece is rectified, so the edges are straight and true and the grout lines can stay thin. Sold by the box: one box covers 23.25 sq ft in 6 pieces and weighs about 92 lb.
Also in Nature Belvedere: 12x24 tile, 24x48 tile, 4x12 tile, 4x24 bullnose, hexagon mosaic, square mosaic.
Made in the USA at Del Conca's plant in Loudon, Tennessee, which is also where it ships from.
Your cart is empty.