Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Quartzite Gray is a 4x12 porcelain tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Quartzite is modeled on Brazilian quartzite, a layered stone with fine, sparkling grain. The rectified, colored body porcelain comes in Bianco, Sand, Gray and Dark Gray, with a Grip 12x24 for wet floors, a Muretto wall tile, a mosaic and a bullnose.
The 4x12 is a small rectangle for walls and floors: run it as a subway, stack it, or set it in a herringbone.
Quartzite Gray has a matte, low-glare face that hides daily wear better than a shiny one. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.42 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
Rectified edges, ground square after firing, allow a tight grout joint. Each box holds 36 pieces, 11.65 sq ft, about 46 lb, and orders round up to full boxes.
Also in Quartzite Gray: 12x24 grip tile, 12x24 tile, 24x48 tile, 4x24 bullnose, muretto mosaic, square mosaic.
Made in the USA at Del Conca's plant in Loudon, Tennessee, which is also where it ships from.
Your cart is empty.