Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Reverence Focus Clay is a 24x48 matte porcelain tile that blends a concrete look with the softer visual character of limestone. Its clay-beige color continues through the color-body construction, keeping the body close in tone to the face. Rectified edges define the large rectangle, which is 9 mm, or 3/8 inch, thick.
The broad 24x48 format gives the quiet concrete pattern room to extend across walls and floors, while its matte finish keeps reflected light muted. V2 shade variation creates only modest shifts between pieces, so the surface reads as controlled rather than highly varied. It is rated for residential and commercial interior floors and walls, including bathroom, kitchen, and living room surfaces, shower walls, backsplashes, and residential light-duty floors.
Water absorption is limited to 0.5% or less, making this impervious porcelain under ANSI A137.1. The body takes up almost no water at that level and does not stain internally. Breaking strength is at least 425 pounds, compared with the ANSI floor-tile requirement of 250 pounds. The tile is resistant to frost and thermal shock, but those results do not expand its rated uses beyond the specified interior applications.
It is sold by the box, with pricing expressed per square foot. Each 67-pound box holds 2 large tiles and covers 15.49 square feet. Focus Clay also appears as 12x24 and 16x32 tile, a 3x3 mosaic, and a 4x24 bullnose. White, Pure Sand, Loyal Gray, and Gratify Gray provide other matte colors in the 24x48 size.
Your cart is empty.