Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Bergen White is a 4x12 porcelain tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Bergen is a stone look made with Del Conca's Trace process, a dimensional glaze that gives the face a real, touchable texture. The color runs through the body, the edges are rectified, and the line covers 24x48 down to 4x12 with a Geometrie decor, mosaics and bullnose.
The 4x12 is a small rectangle for walls and floors: run it as a subway, stack it, or set it in a herringbone.
Del Conca's Trace process builds real relief into the matte face, so the texture catches light like natural stone. The color runs through the body of the tile, so a chip shows the same tone instead of a light clay base. Shade variation is moderate: tone and pattern change from piece to piece, as in natural material. Del Conca rates the face at 0.50 DCOF wet or better, which meets the ANSI A326.3 minimum for level interior floors that get wet.
It ships in full boxes of 11.65 sq ft (36 pieces), roughly 46 lb each.
Also in Bergen White: 12x24 tile, 24x24 tile, 24x48 tile, 4x24 bullnose, Geometrie 12x24 decor, leaves mosaic, square mosaic.
Bergen is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.