Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Bergen Sand is a 12x24 porcelain decor tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Bergen is a stone look made with Del Conca's Trace process, a dimensional glaze that gives the face a real, touchable texture. The color runs through the body, the edges are rectified, and the line covers 24x48 down to 4x12 with a Geometrie decor, mosaics and bullnose.
The 12x24 Geometrie decor carries a relief pattern. It has the same size and edges as the plain tile, so the two mix on one wall.
The Trace glaze gives the matte face a dimensional texture you can feel, not just a printed picture of stone. It is a colored body porcelain: the tint goes all the way through, which keeps chips and cut edges discreet. Del Conca rates the shade variation as moderate, so tone and veining move from one piece to the next.
Rectified edges, ground square after firing, allow a tight grout joint. Each box holds 8 pieces, 15.5 sq ft, about 61 lb, and orders round up to full boxes.
Also in Bergen Sand: 12x24 tile, 24x24 tile, 24x48 tile, 4x12 tile, 4x24 bullnose, leaves mosaic, square mosaic.
Bergen is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.