Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Bergen Sand is a 24x24 porcelain tile with a stone look in a matte finish, 8.5 mm (5/16 inch) thick.
Bergen is a stone look made with Del Conca's Trace process, a dimensional glaze that gives the face a real, touchable texture. The color runs through the body, the edges are rectified, and the line covers 24x48 down to 4x12 with a Geometrie decor, mosaics and bullnose.
Lay the 24x24 square in a grid, a quarter offset or on the diagonal.
The Trace glaze gives the matte face a dimensional texture you can feel, not just a printed picture of stone. It is a colored body porcelain: the tint goes all the way through, which keeps chips and cut edges discreet. Del Conca rates the shade variation as moderate, so tone and veining move from one piece to the next. Its wet DCOF is 0.50 or higher, the ANSI threshold for level indoor floors exposed to water.
The edges are rectified, cut square after firing, so the tile can be set with a narrow grout joint. It ships in full boxes of 23.25 sq ft (6 pieces), roughly 92 lb each.
Also in Bergen Sand: 12x24 tile, 24x48 tile, 4x12 tile, 4x24 bullnose, Geometrie 12x24 decor, leaves mosaic, square mosaic.
Made in the USA at Del Conca's plant in Loudon, Tennessee, which is also where it ships from.
Your cart is empty.