Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Horizons Graphite is a 12x24 porcelain tile with a concrete look in a matte finish, 8.5 mm (5/16 inch) thick.
Horizons mixes a concrete surface with the grain of stone. The rectified, colored body porcelain comes in Ivory, Gray, Graphite and White, from 24x48 to 4x12, with a square mosaic, a 4 inch hexagon and a bullnose.
The 12x24 rectangle can be laid straight, in a brick offset or in a one-third offset.
Horizons Graphite has a matte, low-glare face that hides daily wear better than a shiny one. It is a colored body porcelain: the tint goes all the way through, which keeps chips and cut edges discreet. Del Conca rates the shade variation as moderate, so tone and veining move from one piece to the next. Its wet DCOF is 0.42 or higher, the ANSI threshold for level indoor floors exposed to water.
Rectified edges, ground square after firing, allow a tight grout joint. Sold by the box: one box covers 15.5 sq ft in 8 pieces and weighs about 61 lb.
Also in Horizons Graphite: 24x24 tile, 24x48 tile, 4x12 tile, 4x24 bullnose, hexagon mosaic, square mosaic.
Horizons is produced at Del Conca USA's plant in Loudon, Tennessee, and ships from the factory.
Your cart is empty.