Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
* Usage recommendation must be confirmed by your installer and depends on application, installation methods and general suitability. Stone Tile Depot assumes no liability from any installation and usage recommendations.
Horizons White is a 24x24 porcelain tile with a concrete look in a matte finish, 8.5 mm (5/16 inch) thick.
Horizons mixes a concrete surface with the grain of stone. The rectified, colored body porcelain comes in Ivory, Gray, Graphite and White, from 24x48 to 4x12, with a square mosaic, a 4 inch hexagon and a bullnose.
Lay the 24x24 square in a grid, a quarter offset or on the diagonal.
In matte, the porcelain tile reads soft and natural under any light and keeps smudges from showing. It is a colored body porcelain: the tint goes all the way through, which keeps chips and cut edges discreet. Del Conca rates the shade variation as moderate, so tone and veining move from one piece to the next. Its wet DCOF is 0.42 or higher, the ANSI threshold for level indoor floors exposed to water.
Rectified edges, ground square after firing, allow a tight grout joint. It ships in full boxes of 23.25 sq ft (6 pieces), roughly 92 lb each.
Also in Horizons White: 12x24 tile, 24x48 tile, 4x12 tile, 4x24 bullnose, hexagon mosaic, square mosaic.
Made in the USA by Del Conca USA in Loudon, Tennessee, and shipped from there.
Your cart is empty.