Menu
Contact us
- 1-800-622-8708
- sales@stonetiledepot.com
- 8:00 AM - 8:00 PM EST
Contact us
Handcrafted 80 Inch White Marble Double Bathroom Sink Wall Mount
Thank you, your request is in.
Our team will review the details and get back to you within one business day.

Marble · Wall-Mount sink
This double sink is carved by hand from white marble quarried in Turkey. It runs 80 inches long, 21 inches wide and 8 inches high, with two rectangular basins side by side, so two people can use it at the same time without crowding each other. It is made for a shared primary bathroom or a busy family bath, where one basin is never quite enough in the morning. The stone is real quarried marble, polished to a gloss, and the piece is made to order.

Design
The sink is a long rectangle with two basins carved into it. White marble carries natural, moderate variation: soft gray veins and quiet shifts in tone that move across the 80 inch length, so the stone looks different along its run and no two sinks are identical. That depth is what separates quarried marble from a cast or printed surface. The finish is polished, which brightens the white, sharpens the veining and gives the surface a smooth, reflective face. Over time the marble develops a patina, and a well kept stone sink can look better after many years than when it was installed.
Room for two people at once, along one 80 inch piece of marble.
A gloss finish that brightens the stone and shows its gray veining.

Where to use it
Each basin gives enough room for washing, brushing teeth or shaving without the cramped feeling of a short double vanity, and the length leaves counter space on either side. Couples sharing a primary bath, parents with teenagers and any household with a morning queue at the sink will use both basins every day. Hung on the wall, the sink floats above the floor: the room feels larger and more open, the floor is easier to clean with no cabinet base to work around, and there is no cabinet to soak up water. A 1 inch bracket gap beneath the sink shows the full thickness of the marble. It can also sit above a vanity when storage is needed. The drain holes are 1.77 inches and accept standard fittings.
80" L × 21" W × 8" H, two basins in one piece of white marble.
1.77" drain holes that accept standard fittings.

Installation
An 80 inch marble sink is heavy and long, so the wall needs continuous blocking between the studs along the full mounting height, added while the wall is open. The brackets are fixed into that blocking, and the 1 inch gap beneath the sink leaves room for them. With two basins there are two drains and two sets of supply lines to place, and because a wall-mounted sink has no deck, wall-mounted faucets are usually planned for each basin at the same time. If the sink sits on a vanity instead, the vanity top must be flat, level and built to carry the full length of stone. Use a professional installer for the lifting and the alignment.
Why we chose it
Made to order
This is a production piece made to order, not warehouse stock. It is made on two schedules: the 3 to 4 week option ships sooner, while the 8 to 14 week option is the lower-priced choice; both are the same polished 80 inch double sink. Because it is made to order, it can also be adjusted to custom sizes and finishes, or adapted from wall mount to countertop installation. To start a custom order, contact us with the measurements of the wall.
This is a calcite marble with a polished surface. Like all marble it is porous, and acidic liquids can etch the gloss, so it is sealed to slow the absorption of water and stains. How often it is resealed depends on use, often about once a year.
White
White
White
Beige
Beige
Your cart is empty.